1-20 of 26 results

Sort by

  • Braun Oral-B TriZone Toothbrush
    Braun Oral-B TriZone Toothbrus...
    Designed For:Oral-B TriZone 5000, 5500, Height (Shipping):3.3 cm, Width (Shipp... Designed For:Oral-B TriZone 5000, 5500, Height (Shipping):3.3 cm, Width (Shipping):6 cm, Weight (Shipping):50 g, Depth (Shipping):22 cm more
    Details
  • Braun Oral-B TriZone Toothbrush
    Braun Oral-B TriZone Toothbrus...
    Designed For:Oral-B TriZone 5000, 5500, Height (Shipping):3.3 cm, Width (Shipp... Designed For:Oral-B TriZone 5000, 5500, Height (Shipping):3.3 cm, Width (Shipping):6 cm, Weight (Shipping):50 g, Depth (Shipping):22 cm more
    Details
  • Braun Series 5 HC50 - hair clipper
    Braun Series 5 HC50 - hair cli...
    Weight:0.463 kg, Depth:5.7 cm, Width:15.5 cm, Height:22.2 cm, Body Design Feat... Weight:0.463 kg, Depth:5.7 cm, Width:15.5 cm, Height:22.2 cm, Body Design Features:Charging indicator light, Operating Autonomy:40 min, Voltage:100 - 120 / 220 - 240 V, Full Charge Time:1 hr, Length Settings:3-24 mm, 14-35 mm more
    Details
  • Braun Series 5 HC50 - hair clipper
    Braun Series 5 HC50 - hair cli...
    Weight:0.463 kg, Depth:5.7 cm, Width:15.5 cm, Height:22.2 cm, Body Design Feat... Weight:0.463 kg, Depth:5.7 cm, Width:15.5 cm, Height:22.2 cm, Body Design Features:Charging indicator light, Operating Autonomy:40 min, Voltage:100 - 120 / 220 - 240 V, Full Charge Time:1 hr, Length Settings:3-24 mm, 14-35 mm more
    Details
  • Trend 3/22 X 1/4 Tc Cutter
    Trend 3/22 X 1/4 Tc Cutter
    TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard... TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.All cutters above and including 9.5mm diameter, have TCT plunge centre tips. more
    Details
  • Metabo diamant-corte, 230Â x 22.23Â mm, "Classic," "TC, F
    Metabo diamant-corte, 230Â x 2...
    Special wheel for all types of tiles, glazed and unglazed, natural stone surfa... Special wheel for all types of tiles, glazed and unglazed, natural stone surfaces. Good cutting performance and optimum service life at a good price/performance ratio sintered diamond blade cutting edge; Segment height: 7Â mm; work maximum speed 80Â... more
    Details
  • Metabo diamond-corte, 180Â x 22.23Â mm, "Classic," "TC, F
    Metabo diamond-corte, 180Â x 2...
    Specialised pulley on all types of tiles, glazed and unglazed, natural stone p... Specialised pulley on all types of tiles, glazed and unglazed, natural stone panels. Good cutting performance and optimum stability Time diamond wheel with good price - / performance Sintered cutting rim; Segment Height: 7.0 mm; Maximum working speed... more
    Details
  • Faithfull Router Bit TC Two Flute 22.0MM
    Faithfull Router Bit TC Two Fl...
    Faithfull Router Bit TCT Two Flute 22.0mm 1/4in Shank FAIRB230 The manufacturi... Faithfull Router Bit TCT Two Flute 22.0mm 1/4in Shank FAIRB230 The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every... more
    Details
  • Faithfull Router Bit TC Two Flute 22.0MM
    Faithfull Router Bit TC Two Fl...
    Faithfull Router Bit TCT Two Flute 22.0mm 1/4in Shank FAIRB230 The manufacturi... Faithfull Router Bit TCT Two Flute 22.0mm 1/4in Shank FAIRB230 The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts. Every... more
    Details
  • Trend 18/22 X 1/2 Tc Cutter
    Trend 18/22 X 1/2 Tc Cutter
    Machining of traditional panels and frame doors, formerly done on spindle moul... Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our... more
    Details
  • Trend 2/2 X 1/4 Tc Cutter
    Trend 2/2 X 1/4 Tc Cutter
    Eccentric single flute cutters. Cutters are chosen for fast free cutting, when... Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass.... more
    Details
  • Trend 46/22 X 1/2 Tc Cutter
    Trend 46/22 X 1/2 Tc Cutter
    Self-guiding trimmers with bearings mounted on end of cutter. For trimming pla... Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay.For copy profiling, use the bearing to follow a template or base edge of board.An approximate 3mm overlap should be left before copy profiling. When... more
    Details
  • Tre spade TC-22 tritacarne a mano
    Tre spade TC-22 tritacarne a m...
    Funzionamento a manovella Struttura ghisa stagnata Fissaggio con viti Utilizza... Funzionamento a manovella Struttura ghisa stagnata Fissaggio con viti Utilizzabile con piastre mm 4/20 Dotazione piastra mm 8 more
    Details
  • Metabo diamant-corte, 150Â x 22.23Â mm, "Classic," "TC, F
    Metabo diamant-corte, 150Â x 2...
    Specialised pulley on all types of tiles, glazed and unglazed, natural stone p... Specialised pulley on all types of tiles, glazed and unglazed, natural stone panels. Good cutting performance and optimum stability Time diamond wheel with good price - / performance Sintered cutting rim; Segment Height: 7.0 mm; Maximum working speed... more
    Details
  • Bahco E0614M06 TC Rotary Burr's
    Bahco E0614M06 TC Rotary Burr'...
    High Quality Best brand at best price High performance, Weight: 0.22 lbs., Man... High Quality Best brand at best price High performance, Weight: 0.22 lbs., Manufacturer: Bahco more
    Details
  • Bahco F0612C04 TC Rotary Burr's
    Bahco F0612C04 TC Rotary Burr'...
    Deburring and form machining for all applications due to the universal form Be... Deburring and form machining for all applications due to the universal form Best brand at best price High performance alloy steel, Weight: 0.22 lbs., Manufacturer: Bahco more
    Details
  • Bahco G0313C03 TC Rotary Burrs
    Bahco G0313C03 TC Rotary Burrs
    Useful in confined spaces due to the pointed nose Type of cut: F = Fine, M = M... Useful in confined spaces due to the pointed nose Type of cut: F = Fine, M = Medium, C = Coarse Stock standard: X = yes, Weight: 22.05 lbs., Manufacturer: Bahco more
    Details
  • Bahco A0313M03E TC Rotary Burrs
    Bahco A0313M03E TC Rotary Burr...
    Deburring of edges and plane surfaces Type of cut: F = Fine, M = Medium, C = C... Deburring of edges and plane surfaces Type of cut: F = Fine, M = Medium, C = Coarse Stock standard: X = yes, Weight: 22.05 lbs., Manufacturer: Bahco more
    Details
  • Trend 2/2 X 1/4 High Speed Steel One Flute Cutter
    Trend 2/2 X 1/4 High Speed Ste...
    These are made from a single piece of High Speed Steel, ground with a very fin... These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC... more
    Details
  • Trend 2/2 X 1/4 High Speed Steel One Flute Cutter
    Trend 2/2 X 1/4 High Speed Ste...
    These are made from a single piece of High Speed Steel, ground with a very fin... These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC... more
    Details
Items per page 10 20 40 80