Schoeps W 140 L, Foam Windscreen, Suitable for CMIT 5, Wind noise attenuation ...Schoeps W 140 L, Foam Windscreen, Suitable for CMIT 5, Wind noise attenuation at 18 km / h 18 dB-A, Length: 140 mm, Diameter: 41 - 50 mm, Colour: Anthracitemore
Schoeps B20, Small close-speech guard, Made of washable nylon fabric, Wind noi...Schoeps B20, Small close-speech guard, Made of washable nylon fabric, Wind noise attenuation at 18 km/h with bullet microphones: 25 dB-A, With supercardioid microphones: 26 dB-A, Diameter 50 mm, Colour: Grey, Not suitable for the following types: MK...more
Schoeps W 20 RI, Microphone Outdoor Protection, Consisting of wind shield R1 a...Schoeps W 20 RI, Microphone Outdoor Protection, Consisting of wind shield R1 and W 20 R Wind protection basket W 20 R, Wind noise attenuation at 18 km / h with balls 43 dB-A, with a supercardioid 51 dB-A, Diameter: 90 mm, Colour: greymore
Schoeps W5D, Windshield@+Highly effective wind shield for pressure gradient an...Schoeps W5D, Windshield@+Highly effective wind shield for pressure gradient and pressure receivers with low sound effects. The foam hollow sphere encloses an air volume around the capsule, similar to a wind protection basket. Particularly when using...more
Schoeps A20 S Elastic Mount, Elastic Shock Mount, Simple design, For 20 mm mic...Schoeps A20 S Elastic Mount, Elastic Shock Mount, Simple design, For 20 mm microphones (CMC with capsule), Colour: Greymore
Schoeps A20 Elastic Suspension, Elastic SuspensionThe use of the A 20 is espec...Schoeps A20 Elastic Suspension, Elastic SuspensionThe use of the A 20 is especially recommended when it comes to high structure borne noise suppression, such as when using the microphone preamplifier CMC with capsule on a boom.@+@+For microphones using...more
Schoeps B5, PopscreenIt is sufficient for medium-to-high speakers to protect t...Schoeps B5, PopscreenIt is sufficient for medium-to-high speakers to protect the cardioid and other pressure gradient receivers, especially when they are speech microphones. For bullets it is sufficient even in low winds. Very low sound.@+@+,...more
Schoeps STR 350, Stand Tube@+These stand tubes have a 3/8" threaded pin at the...Schoeps STR 350, Stand Tube@+These stand tubes have a 3/8" threaded pin at the top and a 3/8" female thread at the bottom. Therefore, several rods can be screwed together. They also fit into the collets of the bottom leg BF 250.@+@+@+The included gray...more
Schoeps SGc, Stand clamp, With joint, With clamp made of grey plastic, For com...Schoeps SGc, Stand clamp, With joint, With clamp made of grey plastic, For compact microphonesmore
Schoeps SGCM, Stand Clamp, With joint, With metal clamp, For compact microphon...Schoeps SGCM, Stand Clamp, With joint, With metal clamp, For compact microphonesmore
Schoeps HC 3, Miniature Suspension Device, Fastening takes place on the suspen...Schoeps HC 3, Miniature Suspension Device, Fastening takes place on the suspended cable, Suitable for cables with 3 mm diameter, Incl. SGC stand jointmore
Schoeps B5 D, Hollow Foam Popscreen B 5 D@+For use especially on pressure-grad...Schoeps B5 D, Hollow Foam Popscreen B 5 D@+For use especially on pressure-gradient transducers in light wind and as a close-speech guard. The B 5 D offers good effectiveness, yet has only a slight influence on the sound. It is made of foam but is...more