Thomann UK
Ads related to doepfer a-143-3
Doepfer A-143-3 from other stores
-
Doepfer A-149-2Doepfer A-149-2, Eurorack module, Expansion module for the A-149-1 (Article Nr... Doepfer A-149-2, Eurorack module, Expansion module for the A-149-1 (Article Nr: #199098#), Supplies 8 digital, random voltages, Eurorack format, Width: 4 HP, Depth: 35 mm, Power requirement: +40 mA (+ 12V) / -10 mA (-12V)@+*Note:* Must be mounted... more
-
Doepfer A-106-5 SEM FilterDoepfer A-106-5 SEM Filter, Filter, 12 dB Multi-mode filter, in which the circ... Doepfer A-106-5 SEM Filter, Filter, 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) / -20 mA (-12V) more
-
Doepfer A-160-5 VC Clock Multi...Doepfer A-160-5 VC Clock Multiplier, Voltage Controlled Clock Multiplier, Mult... Doepfer A-160-5 VC Clock Multiplier, Voltage Controlled Clock Multiplier, Multiplication factor can be controlled by control voltage or a regulator, Width: 4 HP, Depth: 35 mm, Power requirements: +50 mA (+12 V) / -0 mA (-12 V) more
-
Doepfer A-143-9Doepfer A-143-9, Quadrature LFO / VCO, Can simultaneously produce sine and cos... Doepfer A-143-9, Quadrature LFO / VCO, Can simultaneously produce sine and cosine signals, 4 Outputs that are phase shifted by 90 degrees, Eurorack format, Width: 8 HP, Depth: 50 mm, Power requirement: +30 mA (+ 12V) / - 30 mA (-12V) more
-
Doepfer A-162Doepfer A-162, Dual Trigger Delay, Allows delayed output of the input signal, ... Doepfer A-162, Dual Trigger Delay, Allows delayed output of the input signal, Power requirement: +40 mA (+ 12V) / -0 mA (-12V), Width: 8 HP / 40.3 mm, Depth: 45 mm (measured from the back of the front panel) more
-
Doepfer A-101-6Doepfer A-101-6, Six Stage Opto FET VCF, New filter module in which so-called ... Doepfer A-101-6, Six Stage Opto FET VCF, New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA more
-
Doepfer A-199 Spring Reverb Mo...Doepfer A-199 Spring Reverb Module VE, Spring reverb module in Eurorack format... Doepfer A-199 Spring Reverb Module VE, Spring reverb module in Eurorack format, By way of spiral springs electronically recreates the reverb effect, Spring system with 3 separate springs, Reverb signal can be fed back to the input, Width: 8 HP, Depth:... more
-
Doepfer A-110-6Doepfer A-110-6, Eurorack Module, Trapezoid Thru Zero Quadrature VCO, Uses qua... Doepfer A-110-6, Eurorack Module, Trapezoid Thru Zero Quadrature VCO, Uses quadrature trapezoid as the fundamental waveform, Features linear Thru Zero frequency modulation and quadrature outputs for all waveforms (two 90 degree out of phase signals... more
-
Doepfer A-155Doepfer A-155, Analog-/ Trigger Sequencer, 2 Switch rows with 8 steps each, Eu... Doepfer A-155, Analog-/ Trigger Sequencer, 2 Switch rows with 8 steps each, Eurorack format, Width: 50 HP, Depth: 40 mm, Power requirement: +80 mA (+ 12 V) / -20 mA (-12 V), Optional expander module: Article Nr #192018# (not included, must be ordered... more
-
Doepfer A-154 Vintage EditionDoepfer A-154 Vintage Edition, Sequencer Controller Module, Vintage edition wi... Doepfer A-154 Vintage Edition, Sequencer Controller Module, Vintage edition with black front plate, Expansion module for A-155 (Article Nr #154958#), Different operating modes, LED display, 8 or 16 sequencer steps, Controls up to 2x A-155 (2x A-155 are... more
-
Doepfer A-155 Vintage EditionDoepfer A-155 Vintage Edition, Analogue and Trigger Sequencer, Vintage edition... Doepfer A-155 Vintage Edition, Analogue and Trigger Sequencer, Vintage edition with black front plate, 2 Switch rows with 8 steps each, Euro rack format, Width: 50 HP, Depth: 40 mm, Power consumption: +80 mA (+12V)/ -20 mA (-12V) more
-
Doepfer A-123-2Doepfer A-123-2, Eurorack Module, Voltage-controlled high-pass filter, 4 Separ... Doepfer A-123-2, Eurorack Module, Voltage-controlled high-pass filter, 4 Separate filter outputs with different slopes: -6, -12, -18, -24 (dB / oct.), Resonance voltage controllable, Level control for input signal, Power requirement: 30 mA (+12 V) / 30... more
-
Doepfer A-128Doepfer A-128, Fixed Filter Bank, 15 Parallel bandpass filters, Amplitude cont... Doepfer A-128, Fixed Filter Bank, 15 Parallel bandpass filters, Amplitude controller per band filter, Width 20 HP, Depth: 60 mm, Power requirements: +20 mA (+12 V) / -20 mA (-12 V) more
-
Doepfer A-101-2 Vactrol Lowpas...Doepfer A-101-2 Vactrol Lowpass Gate, Vactrol lowpass gate, Combination of low... Doepfer A-101-2 Vactrol Lowpass Gate, Vactrol lowpass gate, Combination of low-pass filter (LP) and VCA, Based on the idea of the Buchla module 292, The frequency (in LP mode) or the amplitude (in VCA mode) can be controlled manually (F / A) and via 2... more
-
Doepfer A-118 Noise/Random Gen...Doepfer A-118 Noise/Random, Noise/Random Voltage Generator@+Module A-118 is a ... Doepfer A-118 Noise/Random, Noise/Random Voltage Generator@+Module A-118 is a noise and random voltage generator. It produces the following signals: white noise, coloured noise, and random voltage. White and coloured noise can be used as audio signals,... more
Items per page
Ads related to doepfer a-143-3